Regular exposure to sun, moisture, and salt can wear down a boat’s finish over an extended period of time. 303® Marine Graphene Nano Spray Coating provides up to 12 months of protection to combat these harsh effects of marine climates.
The specialized graphene oxide formula bonds to a boat’s exterior surface, leaving a powerful shield on the top layer. In addition to safeguarding the exterior surface, the spray also adds a deep, mirror-like finish to make it appear sleek and glossy. More importantly, the spray enhances the look of any unique properties on your boat’s surface. For example, if you have metallic flakes in your boat’s gel coat, 303® Marine Graphene Nano Spray Coating will really bring out that shine.
If you are concerned about water spots showing up in boats gel coat or glass, worry no more! With the combined properties of hydrophobic protection and surface temperature reduction, hard water spots will be a thing of the past. The dynamic graphene oxide formula contained in 303® Marine Graphene Nano Spray Coating reduces the surface temperature of paint. Doing so ensures that water cannot dry and embed itself into the surface, causing hard water spots. Any water spots that show up will be on top of the coating. Any instances of lingering water droplets are easily wiped away with a microfiber towel or detailer.
Last but certainly not least, the product is easy to use — simply apply with a microfiber applicator, and buff off. It can even be applied in direct sunlight without the worry of streaking or residue.
Directions (If Applicable):
Shake well before use. Ensure surface is clean and dry before applying product. Spray onto a microfiber applicator. Apply to the surface in a crisscross pattern to ensure complete coverage. Following application, allow product to cure and haze white, around 5-10 minutes, then buff off with a clean, dry microfiber towel. After buffing, no cure time is needed before being introduced to water.
303® Marine Graphene Nano Spray Coating™ can be applied to gel coat, paint, glass, plastic, chrome, metal, and even vinyl wraps.
303® Marine Graphene Nano Spray Coating™ is made using Graphene Oxide. The hydrogen bonding in the Graphene Oxide allows the material to orientate itself and bond better to exterior surfaces.
No, this is not necessary. 303® Marine Graphene Nano Spray Coating™ can be safely layered on top of an existing coating and will not negatively affect the coating underneath it, it will only enhance it.
Yes, 303® Marine Graphene Nano Spray Coating™ can be layered on top of itself, up to three times. We have found layering up to 3 times yields amazing results. 4 layers or more provides the same value as 3 layers.
Yes, 303® Marine Graphene Nano Spray Coating™ provides UV protection.
No, there is no curing time needed after application.
To prolong the effectiveness of 303® Marine Graphene Nano Spray Coating™, we recommend only using a regular boat wash soap, or wash and wax products when washing your boat after applying the product. Do not use any decontamination wash products to avoid possible removal of the coating.
Most towels and applicators can be re-used after applying 303® Marine Graphene Nano Spray Coating™. Wash quickly after use so the product doesn’t have time to harden. It is recommended to keep your “Graphene” towels and applicators separate from your regular supply of microfiber towels and applicators.
No. 303® Marine Graphene Nano Spray Coating™ uses a graphene oxide power which gives the product its black color so no dyes are needed.
No, 303® Marine Graphene Nano Spray Coating™ does not use any dyes, and as the product cures it transitions to a clear appearance avoiding any risk of dying the surface.
There is no difference in formula. The only difference is the size of the product due to a larger surface area to cover with boats versus cars.
